Skip to main content

CCIE Security Lab Emulation

Labels:

Comments

  1. parvez ahmadAugust 12, 2011 at 1:47 AM

    please send me link on parvez.ahmad54@gmail.com

    ReplyDelete
  2. Ronie BarcomaJune 13, 2013 at 5:45 AM

    Good video that provides CCIE Security Lab Emulation. Much understandable than any other. Thanks

    ReplyDelete
  3. SajuJune 13, 2013 at 6:27 AM

    Nice to hear, now as CCIE SEC is changed some more products added so u can email me if you interested in building CCIE SEcv4 lab on you pc

    thnks

    ReplyDelete
    Replies
    1. K MagFebruary 14, 2014 at 2:21 AM

      Hi Saju,

      I am currently preparing for my CCIE security, any advice on building a SECv4 lab on pc?

      Delete
  4. AnonymousOctober 14, 2013 at 4:52 AM

    Great information provided. I appreciate your work.

    CCIE Security

    ReplyDelete

Post a Comment

Popular posts from this blog

Image Recovery Using ROMMON mode

If incase ASA system image is lost or got corrupted we can recover it by booting ASA in ROMMON mode and executing following commands please refer above mentioned diagram. Step 1: Make sure you have assigned the right IP address to the PC which has ASA system image and tftp installed. Step 2: Set the following parameters rommon #0> address 10.1.1.254 rommon #1 > server 10.1.1.1 rommon #2> interface GigabitEthernet0/0 GigabitEthernet0/1 MAC Address: 000f. f775.4b54 rommon #3> file asa801 -k8. bin Step 3: Verify your configured parameters in ROMON mode rommon #4> set ROMMON Variable Settings: ADDRESS=10.1.1.254 SERVER=10.1.1.1 PORT=GigabitEthernet0/0 VLAN=untagged IMAGE=asa801-k8. bin CONFIG= rommon #12> set ROMMON Variable Settings: ADDRESS=10.1.1.50 SERVER=10.1.1.1 ------- output omitted for brevity ----- rommon #13> unset ADDRESS ROMMON Variable Settings: ADDRESS=0.0.0.0 SERVER=10.1.1.1 GATEWAY=0.0.0.0 ------- output omitted f...
3 comments
Read more

ASA TFTP Backup

If you have no backup solution, you can still take backup on your machine by executing single command. But before, there some prerequisite which has be fulfill. 1. TFTP software 2. Configuring ASA For first requirement you can use any freely available. Second you have to make sure, PC on which you are installing tftp you can ping from ASA simply you have connectivity. Than simple execute following command in config mode of ASA: tftp-server peceuplink <tftp-server-ip> /<filename> ASA1(config)#tftp-server inside_.1.1 lan 192.168/ASA001.cfg In above example inside_lan is nameif on inside interface, 192.168.1.1 is tftp server ip and /ASA001.cfg is the file name. Now in order to send copy of running file to tftp server you have excute write net . Make sure on your PC the folder has proper privileges.
Post a Comment
Read more