Skip to main content

CCIE Security Lab Emulation

Labels:

Comments

  1. parvez ahmadAugust 12, 2011 at 1:47 AM

    please send me link on parvez.ahmad54@gmail.com

    ReplyDelete
  2. Ronie BarcomaJune 13, 2013 at 5:45 AM

    Good video that provides CCIE Security Lab Emulation. Much understandable than any other. Thanks

    ReplyDelete
  3. SajuJune 13, 2013 at 6:27 AM

    Nice to hear, now as CCIE SEC is changed some more products added so u can email me if you interested in building CCIE SEcv4 lab on you pc

    thnks

    ReplyDelete
    Replies
    1. K MagFebruary 14, 2014 at 2:21 AM

      Hi Saju,

      I am currently preparing for my CCIE security, any advice on building a SECv4 lab on pc?

      Delete
  4. Presidential TrainingOctober 14, 2013 at 4:52 AM

    Great information provided. I appreciate your work.

    CCIE Security

    ReplyDelete

Post a Comment

Popular posts from this blog

Image Recovery Using ROMMON mode

If incase ASA system image is lost or got corrupted we can recover it by booting ASA in ROMMON mode and executing following commands please refer above mentioned diagram. Step 1: Make sure you have assigned the right IP address to the PC which has ASA system image and tftp installed. Step 2: Set the following parameters rommon #0> address 10.1.1.254 rommon #1 > server 10.1.1.1 rommon #2> interface GigabitEthernet0/0 GigabitEthernet0/1 MAC Address: 000f. f775.4b54 rommon #3> file asa801 -k8. bin Step 3: Verify your configured parameters in ROMON mode rommon #4> set ROMMON Variable Settings: ADDRESS=10.1.1.254 SERVER=10.1.1.1 PORT=GigabitEthernet0/0 VLAN=untagged IMAGE=asa801-k8. bin CONFIG= rommon #12> set ROMMON Variable Settings: ADDRESS=10.1.1.50 SERVER=10.1.1.1 ------- output omitted for brevity ----- rommon #13> unset ADDRESS ROMMON Variable Settings: ADDRESS=0.0.0.0 SERVER=10.1.1.1 GATEWAY=0.0.0.0 ------- output omitted f...
3 comments
Read more

VPN Site-to-Site IOS

In this tutorial I am going to show you how we can configure site to site VPN on two IOS routers. In this example I have used 3750 Router in emulated environment. VPN stands for Virtual Private Network, in which you extend your corporate network across internet in secure fashion. In VPN it has different types and two main types are as follows: Site-to-Site VPN Remote Access VPN Site-to-Site is manly used to do connectivity between HQ and branches. Whereas, Remote Access is mainly used by mobile user, software is installed and proper credentials provided so that they can connect to Corporate Network from anywhere and can access anything they are authorized for. Following is diagram with related information we need to start with. So there are following steps your need to do on both routers in order to make them communicate over the Service Provider Network Securely. Step 1: IKE Phase 1 Step 2: IKE Phase key Step 3: IKE Phase 2 (transform-set) Step 4: Interested traffic (wh...
Post a Comment
Read more